Realme recently released ColorOS 6.0 update for the Realme 2 Pro, but unfortunately, it caused bootloop issue on the device. After installing the update manually and rebooting the Realme 2 Pro, the phone stuck on the Realme yellow screen. The company quickly stopped the update after getting the complaint from users.
If your Realme 2 Pro stuck at boot loop (stuck on the Realme yellow screen) after installing the recently released ColorOS 6.0 update (ColorOS 6.0 RMX1801EX_11.A.20), here is how to fix it. This method only works with the RMX1801 (4GB + 64GB/6GB + 64GB) variant. It will not work with the Realme 2 Pro RMX1807 (8GB + 128GB) variant.
We expect that the company will soon resolve the issue and release a new ColorOS 6.0 update. Meanwhile, here is a solution to resolve the Realme 2 Pro bootloop issue caused by the recent update.
Requirements
Realme 2 Pro RMX1801 (4GB + 64GB/6GB + 64GB)
An 8GB or 16GB micro SDcard formatted to VFAT
Fix Realme 2 Pro Bootloop Issue (RMX1801 only)
1. Download the Realme 2 Pro firmware package (RMX1801EX_11_OTA_0210_all_YkJueYPOAFXQ.ozip) to your PC.
2. Format a micro SDcard into FAT32 file system, and then save the download firmware package on it.
3. Insert the micro SDcard into your Realme 2 Pro RMX1801.
4. Switch off the phone and then press the Volume Up + Power buttons together. When the phone starts rebooting, immediately press Volume Down + Power button until ColorOS recovery mode opens.
5. In the Recovery menu, select ‘English’ and then select ‘Install from storage device’.
6. Enter your lock screen password, then select From SD card, then select the firmware package and then click OK to install it.
7. Wait until the process completes. Once you get Install successful message, click Reboot to restart your phone.
[source]
It’ll delete data from the internal storage, so take a backup before proceeding with the steps.
Does it delete all the photos in internal storage?please reply.
Comments are closed.