Galaxy Note 3 is the latest android device from Samsung that runs on Android 4.3 Jelly Bean OS. If you have rooted it and installed custom recovery for flashing custom ROMs or removing bloatware apps or implementing new features, but after sometime longing about the stock firmware or ran into problems when perform customizing, here is how to unroot and return back to stock firmware.

Note-3

Advertisement

Unrooting Galaxy Note 3 and returning back to stock firmware is relatively a simple process, but requires little long time to complete. Also, it’ll wipe your device, so backup your phone data such as personal files, images, videos, messages, emails, contacts, apps, SMS, Contacts, Call Logs, Bookmarks, etc.

Disclaimer: This guide should give you all the information you need to restore your Galaxy Note 3 to stock firmware, but we can’t take responsibility for anything that goes wrong.

Pre-requisites:

1. Enable USB debugging mode on your device.

2. Make sure your Galaxy Note 3 is fully charged.

3. Install USB driver for Note 3 on your Windows PC or install Samsung Keis.

4. Check your Note 3’s model number. The model number will vary based on carriers, region and processor. To check it, go to your phone Settings – General – About and check Model number. Note down the firmware number in safe place.

5. Download appropriate stock firmware for Note 3 from below links. Save the firmware file on your desktop and extract the content.

Galaxy Note 3 SM-N900
Galaxy Note 3 Duos SM-N9002
Galaxy Note 3 SM-N900W8
Galaxy Note 3 LTE SM-N9005
Galaxy Note 3 SM-N900S
T-Mobile Galaxy Note 3 SM-N900T
Sprint Galaxy Note 3 SM-N900P

Unroot and Install Stock Firmware on Galaxy Note 3.

– Download ODIN application on your desktop.

– Put Note 3 into Download mode. To do so, switch off it, press, and hold Volume Down + Home + Power buttons together. When the screen turns up, hit the Volume Up button.

– Now, connect your device to the PC via USB cable and run the ODIN on your PC. You should see blue sign in Odin screen, otherwise check driver installation and USB cable.

– On ODIN, click the PDA button, and select the firmware file that you download above with “tar.md5”.

– Check the boxes “Auto Reboot”, “F. Reset Time” and “PDA” and make sure “re-partition” is NOT enabled.

– If everything ok, hit the “Start” button on ODIN.

Once the process completes, Note 3 will reboot automatically. For the first time, it will take some time to boot. That’s it.

Previous articleMicrosoft Remote Desktop For Android: Connect Windows Remotely From Anywhere
Next articleHow To Activate LG G2 Smart Screen Feature
Kannan
Kannan is a computer and Android enthusiast, a blogger by passion and a tech freak. His always ready-to-help attitude, knowledge and hard work is what drives him.